Make your own free website on

Homelite engine work Page 2 of 3!

This is a tool made to drill the holes for a 4 bolt water jacket.

The tool centers on the spark plug hole and rest flat on the top of the head.

Then the 4 holes are drilled.

Then the holes are tapped with a 6/32 tap.

The next step is to drill out and tap the hole just above the exhaust port.This should be done by hand.

Use a 1/8 of an inch allen screw and a little J B weld to place in the tapped hole.

NEXT to Page #3

There is more

This Banner will take you to Troy's Main page!


Email your questions or comments to

Troy HERE!

If you have a website or know of a GREAT RC Webpage. Click HERE and type the ULR I would like to see it!

If you Enjoyed this Website PASS IT ON!