Make your own free website on

Welcome to the FA project page # 1.

Click on the thumbnails and Enjoy!

Stock used for the trucks.

Stock is cut for the bearing blocks.

Then the blocks are trued and the truck plates are cut.

Holes for the bearings are marked and drilled.

Then the bearing holes are reamed to size. ( A good press fit is used on all bearings)

Ready for the bearings to be pressed in.

All the parts ready to be bolted together for the front truck. (Note the top bearing block is cut on both sides to clear the gear)


This Banner will take you to Troy's Main page!


Email your questions or comments to

Troy HERE!

If you have a website or know of a GREAT RC Webpage. Click HERE and type the ULR I would like to see it!

If you Enjoyed this Website PASS IT ON!